Blog Archives

Using the VEX LCD with the Arduino

VEXLCD_Arduino

Have you ever needed an easy way to display output from your Arduino?  Sure, it is possible to use the serial monitor when the robot is connected, or to use a blinking LED, but those options don’t always work well. 

Posted in Arduino, electronics, Robot Programming, Tutorial, VEX

Choosing a Resistor for your LED

Circuit diagram for LED

I got an Arduino (Uno) for Christmas! Now that I’ve expressed my excitement, I’ll continue on to the rest of this post. A standard introduction to Arduino is to turn an LED on and off from some pin.  However, for

Posted in Arduino, electronics, Tutorial

ROBOTC Pointers and Stacks Tutorial

RobotC: Pointers and Stacks

Xander over at BotBench.com has written up an excellent tutorial on using pointers in ROBOTC.  This is a great help, especially for programmers like myself who have not (yet) learned C or C++ and pointer usage. He has also written

Posted in Robot Programming, ROBOTC, Tutorial, VEX

ROBOTC: Functions

functions

I recently responded to a question about subroutines on the VEX Forum.  I wrote up a fairly detailed response, so I decided to turn it into a blog post. Oftentimes, in programming, we come across situations where we need to

Posted in Robot Programming, ROBOTC, Tutorial, VEX

Line Following Tutorial Videos for FLL

LineFollowing

When you look for FLL robot videos on YouTube, you will often find that the world’s “best” robots often make use of the light/color sensor.  These robots also tend to make some use of line following.  Line following is an

Posted in Control Loops, FLL, NXT, Robot Programming, sensors, Tutorial

Updating NXT Firmware

Firmware

Have you ever needed to update your NXT firmware, and didn’t know exactly how?  I’ve just uploaded a video to YouTube that shows, step-by-step, how to download the newest version of the NXT firmware. Why should you even bother updating

Posted in NXT, Robot Programming, Tutorial, video

Arrays in ROBOTC

arrays

I’ve seen multiple people ask how arrays work in ROBOTC, so I thought I’d write a post about arrays.  Note: I’m going to be describing several routines here that require a knowledge of loops.  Loops are, in general, something that

Posted in NXT, Robot Programming, ROBOTC, Tutorial, VEX

An easy way to install Ubuntu

ubuntu

Recently, I decided I wanted to try Ubuntu Linux.  However, I just wanted to try it; I didn’t want to replace my installation of Windows Vista (I have a lot of Windows-only programs).  I’m also risk-adverse, so I didn’t want

Posted in Linux, Tutorial, Ubuntu

Selecting Autonomous with LCD (ROBOTC)

One of the great features of the VEX LCD screen is that it can be used to select multiple autonomous modes.  However, figuring out how to do so appears to stump many programmers.  In this post, I’ll explain how to

Posted in Robot Programming, ROBOTC, Tutorial, VEX

ROBOTC and the VEX LCD

In an older post, I reviewed the VEX LCD and provided some uses for it.  Now I will explain some of the commands to program the VEX LCD with ROBOTC. Port SetupTo tell ROBOTC which port the LCD is plugged

Posted in Robot Programming, ROBOTC, Tutorial, VEX

Twitter